controls
Revival Command Touch
Wall panel and app control for sauna, steam, lighting and aroma, with scheduling and service alerts.
Heat · Steam · Light · Aroma · Panel + app · 230V 1N~
Home · Hotel · Gym · Commercial
studio · 1 / 4
Sauna Heaters
Revival Ignis 6
Heat, precisely engineered.
Wall-mounted heater for private saunas up to 8 m³, with digital control and 25 kg of stone.
- Output
- 6.0 kW
- Room volume
- 5–8 m³
- Supply
- 400V 3N~
- ✓Supplied and installed by Revival in Nepal
- ✓Critical spares held in Kathmandu
- ✓2-year warranty, Revival Care available
6.0 kW · 5–8 m³Request quote
Designed for the complete sauna experience
Stone mass is what separates a sauna from a hot room. Ignis 6 carries 25 kg of Himalayan-grade stone across a wide element bed, so the heat arrives soft and holds through a full session rather than spiking and dropping with the thermostat.
Even heat across the bench
Airflow is drawn low across the floor, over the elements and out at bench height. The result is a 4–6 °C spread between foot and head level instead of the 15 °C you get from a heater sized by wattage alone.
Specifications
Performance
- Output power
- 6.0 kW
- Recommended room volume
- 5–8 m³
- Heat-up time
- ~35 min to 80 °C
- Maximum temperature
- 110 °C
- Stone capacity
- 25 kg
Electrical
- Voltage
- 400V 3N~ 50 Hz
- Current
- 3 × 9 A
- Control
- Digital, external unit
- Protection class
- IPX4
Physical
- Dimensions (W×D×H)
- 410 × 280 × 590 mm
- Weight, empty
- 11.5 kg
- Mounting
- Wall bracket, included
- Warranty
- 2 years, Revival Care available
Installation requirements
What the room has to provide
Published so your architect, electrician and contractor can plan around it — before the walls close.
- Electrical
- Dedicated 3-phase circuit, 400V, 3 × 16 A MCB with 30 mA RCD.
- Cable
- 5 × 2.5 mm² heat-resistant silicone cable from heater to control unit.
- Clearances
- 50 mm to side walls, 120 mm to the front bench, 1100 mm to ceiling.
- Ventilation
- Inlet 100 mm below the heater, outlet on the opposite wall at bench height. 5–8 air changes per hour.
- Room build
- Aluminium foil vapour barrier behind 60–70 mm mineral wool insulation, sealed at every seam.
- The control unit must be mounted outside the hot room.
- Load calculation is done by Revival before order — send the room dimensions and wall build-up.
What Revival delivers
Every system on this site is supplied with the work that makes it function — which is the difference between buying equipment and owning a wellness environment.
- ✓Product supply
- ✓Technical sizing
- ✓Installation
- ✓Commissioning & testing
- ✓User training
- ✓Warranty & Revival Care
Complete the system
sauna
Revival Nordic Cabin
Four-person indoor Finnish sauna in thermally modified aspen, built to the dimensions of your space.
4 people · From 2.0 × 1.8 m · 6–8 kW
Home · Hotel
Downloads
Specifying this system? The full library — CAD details, BIM families, load data and specification text — is at Revival for Professionals.
Questions
- Can Ignis 6 run on single-phase supply?
- Not at 6 kW. Single-phase installations are limited to 4.5 kW in most Kathmandu residential supplies — we would specify the 4.5 kW variant or upgrade the circuit.
- How much does it cost to run?
- About 6 units of electricity for a first heat-up plus roughly 3 units per hour held at temperature. A typical 90-minute session with two people is under 10 units.
Related systems
sauna heaters
Revival Ignis 9
9 kW commercial-grade heater for saunas up to 14 m³, built for back-to-back sessions.
9.0 kW · 9–14 m³ · 400V 3N~
Hotel · Gym · Commercial
sauna
Revival Infrared Suite
Full-spectrum infrared cabin for apartments — low load, no plumbing, ready in fifteen minutes.
2.4 kW · 2 people · 230V 1N~ 16 A
Home